If you’re looking for an air compressor that can handle plasma cutting, you’ll want to check out the best air compressor for plasma. This air compressor is specifically designed to handle the high-pressure needs of plasma cutting, and it can make short work of even the toughest jobs. With its powerful motor and durable construction, the best air compressor for plasma is built to last, and it’s sure to become a valuable addition to your shop.
10 Best Air Compressor For Plasmas
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
The Air force 12ci Plasma Cutter with Built-In Air Compressor is a great choice for those who want a reliable and powerful air cutter. This cutter comes with a 120V air compressor, so you can easily cut through materials with ease. Additionally, the air force 12ci Plasma Cutter with Built-In Air Compressor is easy to move around, so you can cut down on space costs by moving it around with your work area.
Feature
- Built in Air Compressor
- Cuts faster than oxy fuel
- Smaller heat-affected zone for less warping
- No gas pressure settings for flame tuning needed
- More precise cut, thinner kerf, less slag to clean up
HZXVOGEN 40 Amp Plasma Cutter with Built-In Air Compressor 220V Contact Pilot ARC Air Plas…
The HZXVOGEN 40 Amp Plasma Cutter with Built-In Air Compressor 220V Contact Pilot ARC Air Plasma Cutting Machine is the perfect choice for those who want to cut Plasma and other short-wavelength light-based videos and images. The HBC6000Pro’s digital display and easy-to-use blade means that you can quickly and easily select the right cutting step. The HZXVOGEN 40AMP Plasma Cutter with Built-In Air Compressor 220V Contact Pilot ARC Air Plasma Cutting Machine is reliable and efficient, and can handle even the most challenging cutting tasks.
Feature
- READY TO CUT PLASMA CUTTER – HZXVOGEN HBC6000Pro plasma cutter equipped with built-in air compressor, do not need to install air compressor regulator. You literally just need your plasma cutter and a power source to start cutting. This makes doing jobs out in the field incredibly easy
- PERFECT CLEAN FINISH, SAVE TIME AND MATERIAL – Output Data:15-40A DC output, 0.3″ (6-8mm) ideal clean cut and 0.6” (12-15mm) maximum severance cut under 220V. HBC6000Pro plasma cutter have plasma cutter have gas delay function, it will bring even cuts, little deformation and little slag. Do not need to grind too much after cutting
- TWO EXTERNAL AIR FILTERS, LONGER SERVICES TIIME – The two air filters of HBC6000Pro plasma cutter are to make the compressor air clean, keep dust outside the machine, and reduce noise. Most of the plasma cutter equipped air filter inside the machine, but ours are external, which protect electronic components being damaged by high temperature
- AIR SWITCH PROVIDES COMPREHENSIVE PROETCTION – Most of plasma cutters are equipped with rocker switch which can withstand lower current and does not have leakage protection. Our plasma cutter came with high-power air switch which can withstand higher current and power off automatically when short-circuit or leakage to protect you, machine and your power system
- BUY WITH CONFIDENCE – HZXVOGEN offers good after-sales service. If the machine can not work or have other problem when working, please contact us at the first time. We have agent in the United States and our 24 x 7 friendly customer support team is always ready to help
Motor Guard – Filter Air 1/4 Npt (M30)
Motor Guard is the perfect solution for your air filter needs. Byuesday morning, you would be ready to go! The Motor Guard filter air 1/4 Npt is precision-mated to your engine and helps keep your air filter clean and free of contaminants.
Feature
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
Pilot Arc Plasma Cutter, Cuwiny 50 Amp Dual Voltage 110/220v Non-Touch Pilot Inverter Air …
The Pilot Arc Plasma Cutter is a high-quality, dual-voltage, non-Touch pilot inverter air Plasma cutting machine. It has a 14mm clean cut and a 16mm max Severance. It is also a carbon steel, iron, and aluminum compatible machine. It has a 50 Amp Dual Voltage and a 110/220V non-Touch power cord. It is sure to cut through carbon steel, iron, and aluminum with ease.
Feature
- PILOT AIR PLASMA CUTTER: Suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. It is high frequency arc starting plasma cutter. Uses non-hazardous compressed air to cut, safe and at low cost.We offer 30-Day 100% satisfaction or money back guarantee and 1 year limited warranty.
- NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 5/8” maximum severance cut under 220/240V. 10-35A DC output, 2/5″ ideal clean cut and 1/2″ maximum severance cut under 110/120V.
- DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).Air Pressure 0.4-0.7MPa. Duty Cycle: 60%. Max Current: 50 Amp. IGBT Advanced Inverter Plasma Technology. Automatic indicate the voltage no need to switch by handle from 110v to 220v. Better use 63Amps power breaker for this machine. Cutting machine come with NPT 1/4’’ air connector, very quick to connect machine to air compressor.
- AIR REGULATOR and HIGHT QUALITY ACCESSORIES: Our plasma cutters use a better air regulator and are equipped with a plastic tape, which is the best air regulator on the all market. They solve a very distressing problem of other products on the market: the regulator can’t get air pressure. We offer a full range of quality accessories and AG60P pilot arc torch, work with standard parts, you easy to find the consumables from our Cuwiny shop.
HITBOX 2-in-1 50 Amp Plasma Cutter with Built-In Air Compressor Non-Touch + 220V MMA Welde…
The HITBOX 2-in-1 50 Amp Plasma Cutter with Built-In Air Compressor Non-Touch + 220V MMA Welder Digital Inverter IGBT Clean Cut Cutting Machine is a great device for those who want to cut hair or make things looking clean. It has an automatic air compressor that makes sure that the cut is completed cleanly, and it has a digital inverter IGBT clean cut cutting machine.
Feature
- MULTIPURPOSE WELDER AND CUTTER: Adopting the most advanced switch power inverter technique. Cut many metals up to 1/2″ thick with the 50A plasma cutting function. Use the 200A stick welder for variety of metals. Features an 50Hz/60Hz input power frequency and 80% power efficiency
- READY TO CUT PLASMA CUTTER – HITBOX CT55 Non-Touch plasma cutter equipped with built-in air compressor, do not need to install air compressor regulator. You literally just need your plasma cutter and a power source to start cutting. This makes doing jobs out in the field incredibly easy
- AIR SWITCH PROVIDES COMPREHENSIVE PROETCTION – Most of plasma cutters are equipped with rocker switch which can withstand lower current and does not have leakage protection. Our plasma cutter came with high-power air switch which can withstand higher current and power off automatically when short-circuit or leakage to protect you, machine and your power system
- Wide Application: Cuts stainless steel, alloy steel, mild steel, copper, aluminum, and other metal materials with ease, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.Suit for installation engineering, construction processing, auto repair, advertising processing
- 1 YEAR WARRANTY 1pcs 2in1 Plasma cutter,1pcs S45 Cutting Torch,1pcs Electrode Holder with cable,1pcs Earth clamp with cable,1pcs Gas Tube,2pcs hose clamps,1pcs welding brush/ hammer combo. HITBOX portable welder offers a good warranty. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence
Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2″ Clean Cut Air Plasma Pilot Arc 110/220V…
The Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2″ Clean Cut Air Plasma Pilot Arc 110/220V High Frequency Inverter Machine 3/5″ Max Cutting for Copper Alloy Mild Steel Aluminum is the perfect machine for cutting copper alloy mild steel aluminum. It has a 50 Amp CUT50DL rating and can cut distances of 3/5″ to 1″ with perfect cleanliness. The machine also features a maximum cutting distance of 110/220V and is compatible with both electric and gas-powered machines.
Feature
- 🛒[Duty Cycle] Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A Duty Cycle Pilot Arc Air Plasma Cutter with high frequency inverter( no compressor inside)【30A breaker suggested for220V,50A breaker suggested for 110V】
- 🛒[Cutting Thickness] On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2″(12mm). Max Severance Thickness: 3/4″(16mm) Under 110V Clean Cut Thickness : 3/8 ‘’(9mm) output current 30A.
- 🛒[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty
- 🛒[Voltage Transfer] Conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI.
- 🛒[Full Package Kit] 1 X 13ft AG60 Plasma Cutter Torch 1X Electrode holder and earth clamp each 6.56 ft cable 1 X Hose 6.5ft 1X Air Pressure Valve [ No Compressor Included ]
Amico APC-70HF, 70 Amp Non-touch Pilot Arc Air Plasma Cutter, 90~300V Wide Voltage Cutting…
The Amico APC-70HF is a 70 Amp Non-Touch Pilot Arc Air Plasma Cutter that can handle most cutting tasks. It has a clean cut width of 80% and a duty cycle of 1.2 inches of cuts per hour. The Arc Air fuel type provides excellent cutting performance with a fuel economy of 30%. The machine is equipped with an 8-inch work surface, and is available in a variety of colors.
Feature
- APC-70HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
- APC-70HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- APC-70HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
- 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
- APC-70HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.
Hypertherm 088096 Powermax 30 AIR Hand System with 15′ Lead
The Powermax 30 AIR Hand System is the perfect solution for use in refrigeration, air conditioning, and heating applications. It features a temperature control unit and an automatic shut-off system. The system is made of durable materials, and it can handle a lot of useages.
Feature
- Operate it anywhere with the internal air compressor
- Plug into any 120 or 240 V power with Auto-Voltage technology and included plug adapters
- Highly portable. The smallest, lightest weight system in its class
- New AIR T30 torch is rugged and designed to withstand the toughest environments
- Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations
WARCKING Plasma Cutter CUT50K Contact pilot arc air plasma cutting machine,With Built In C…
The WARCKING Plasma Cutter CUT50K is a high-quality, high- performance plasma cutting machine that is perfect for the most demanding cutting needs. This cutting machine has a built-in compressor DC inverter and is associated with the WARCKING company. With its 50-amp Pilot Arc Compressor, the WARCKING Plasma Cutter CUT50K is able to cut through materials at a much faster rate than with other types of plasma cutting machines. Additionally, the WarCKING company hasput into it all the necessary features to make this cutting machine a success.
Feature
- Lower your usage cost:The air compressor is integrated into the machine to avoid the trouble of carrying an additional air compressor.Of course it also supports external air source.use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- Contact pilot arc: This plasma cutter effectively cuts rough, painted and rusted surfaces with minimal slag.
- Output Data:15-45 A DC output, 0.3″ ideal clean cut and 0.6” maximum severance cut under 220V.
- Safety Protection: Built in over current protection, over load protection, temperature control.the cutting works in a more safer and professional way.
- Quality Assurance：We Adopt high standard are manufacturing process and quality management system. provide a one 1 year warranty，if you have any questions, please contact us for support， to ensure that you are carefree.
Jewboer 2 pack Air Compressor Filter Oil Water Separator Air Dryer for Spray Gun Plasma Cu…
The Jewboer 2 pack Air Compressor Filter Oil Water Separator Air Dryer for Spray Gun Plasma Cutters Air Tools Air Line 1/4″ NPT Inlet and Outlet,with Quick Connector is a must-have for any air clean up! It allows you to clean airineries and filters without the use of water or oil. The filter can be easily and quickly installed with the included quick connector. This product is also a great tool for air gun painting and other air-based work.
Feature
- Eliminates water,oil,dust and particles in air line from air compressor
- Mainly suitable for paint spray gun and air compressor,matched used with gun,pneumatic tools and hoses
- Stops water vapor and particles from entering air tools and extends tool life
- Universal 1/4″NPT inlet and outlet design easily connects air line with air tools and spray guns
- Condensation exhaust valve is included in this product,Air Pressure:90 PSI
Things To Keep In Mind Before Buying A Air Compressor For Plasma
Cost
When you think about buying the best air compressor for plasma, the cost will always be a factor to consider. Of course, there’s more to it than that, so let’s look at the most important parts of the price equation.
The first thing you should know is that it/’s not about the cheapest air compressor for plasma in the world. Sure, you’ll find some that are a fraction of the price of others.
The second thing to keep in mind is that air compressor for plasma prices can vary widely depending on the brand. That said, there are still plenty of options that fit within your budget, so you shouldn’t have too much trouble finding something you’re comfortable with.
Brand Value
There’s no industry standard for what makes the best air compressor for plasma brand, but it is often determined by things like a company’s reputation, longevity, and customer service.
There are hundreds of brands out there, and each has a different mission and vision. Some of them offer products at a reasonable price, while others are more concerned with creating an image for themselves or getting a higher price.
You can’t always rely on a brand name alone to tell you about its performance, so it’s best to do your research before buying one. That said, here are some factors to consider when you’re looking for a air compressor for plasma that will last and provide quality service.
Durability
One of the first things you need to think about when you start your air compressor for plasma comparison is how long it will last and whether it’s worth the money. It’s important to understand what type of use your air compressor for plasma will receive, as this can impact its durability.
All of the air compressor for plasmas have different features and benefits, so it’s important to know exactly which one is the best air compressor for plasma before choosing one of these models. There’s no such thing as a air compressor for plasma that will last forever. Therefore, it’s important to know what you’re getting into when buying a air compressor for plasma. You don’t want to invest your hard-earned money in something that won’t last.
Features
When you’re choosing a air compressor for plasma, it’s essential to understand what the manufacturer has included in the price tag. When you buy a air compressor for plasma from a well-known name in the industry, you can expect its quality to be high.
The more brands they’ve made air compressor for plasmas for, the better. For example, if you’re considering buying a air compressor for plasma from a brand, you should know that they’re a big name in the industry and have a very large selection of models.
That said, not all brands are created equal, so you may want to research different brands on your own to see which one you like best.
Customer Reviews
You’re buying a air compressor for plasma online, don’t forget to check the customer ratings. These days, you can find a range of different air compressor for plasma reviews online. You can either read through them all or look at the most relevant ones to you.
If you’re looking for a specific model, it’s important to read all of the reviews that apply to your specific purchase and select the best one that matches your needs and preferences.
Design
When you’re buying a air compressor for plasma, you need to think about what it looks like first. It’s important to know that some people enjoy the “industrial look,” while others like the “contemporary” design. It’s important to know what style appeals to you, as this will help you find your perfect match.
Frequently Asked Questions Related to air compressor for plasma
1. What are air compressors for plasma used for?
There are a few different types of air compressors that can be used for plasma cutting, depending on the specific application. Typically, a plasma cutter will use either a piston-type air compressor or a diaphragm-type air compressor.
2. How do air compressors for plasma work?
The air compressor for a plasma cutter is used to create the plasma, which is a hot ionized gas. The compressor takes in air and compresses it to a high pressure. This high pressure air is then sent through a nozzle, where an electrical arc is used to heat the air. The air then expands and cools, creating the plasma.
3. What are the benefits of using an air compressor for plasma?
An air compressor for plasma can help to improve the quality of your cuts, as well as increase your production speed. Additionally, it can help to extend the life of your consumables.
Asking yourself these questions can help you determine whether or not a air compressor for plasma is good for you.
How often do I use my air compressor for plasma?
Does the air compressor for plasma fit my needs?
How much money am I willing to spend?
Does the model appeal to me aesthetically?
Does the air compressor for plasma feel like it’s durable and/or long lasting?
What is the best air compressor for plasma for my budget?
What do the reviews say about this product?
How much will this product cost me over time?
What benefits are there with buying this product?
End Note
The air compressor for plasma is an excellent tool for anyone who wants to cut or weld metal. It is easy to use and very versatile. It is also very affordable.